Table of Contents
Advertisement
INSTRUCTIONS FOR USE
5 INSTRUCTIONS FOR USE
5.1
General information
This appliance must only be used for its expressly intended purpose for cooking or heating food. Any other
use is considered improper. The appliance is also intended for industrial use and must only be used by
personnel trained for use and aware of the risks that the hot element entails.
Warning
The appliance operates at high temperatures, so the following is necessary:
· Pay attention to the areas surrounding the hot surface during routine normal operation
(danger of scalding);
· RISK OF BURNS Do not touch hot surfaces floor with your hands or other parts of the body
to avoid burns caused by high temperatures;
· After switching off the appliance, wait for a sufficient time for it to cool before carrying out
any cleaning or maintenance operation.
5.2
Lighting and adjusting the open rings
The corresponding burner marked on the index is indicated above each knob on the front panel
5.3
Starting the main burner and adjusting the temperature
· Turn the knob to the left from position "0" as far as the mark
pressing the button
· Turn the knob into position
5.4
Turning the appliance off
· Press and turn the gas cock knob to position "0". This control stops the gas supply to the burner.
5.5
Igniting and adjusting the static oven
to ignite the flame. Hold down until the thermocouple keeps the flow of gas open.
to set the burner to minimum
Translation of the original instructions
and hold it down for a few seconds by
18
Advertisement
Table of Contents
