Table of Contents
Advertisement
INSTRUCTIONS FOR USE
4 INSTRUCTIONS FOR USE
4.1
General information
This appliance must only be used for its expressly intended purpose for cooking or heating food. Any other
use is considered improper. The appliance is also intended for industrial use and must only be used by
personnel trained for use and aware of the risks that the hot element entails.
Warning
The appliance operates at high temperatures, so the following is necessary:
· Pay attention to the areas surrounding the hot surface during routine normal operation
(danger of scalding);
· RISK OF BURNS Do not touch hot surfaces floor with your hands or other parts of the body
to avoid burns caused by high temperatures;
· After switching off the appliance, wait for a sufficient time for it to cool before carrying out
any cleaning or maintenance operation.
·
Do not operate the appliance without water in the tank
4.2
Turning on the appliance
· When the appliance is powered up, the red indicator light flashes briefly for about 1/2 second
· If there is no water in the tank, the red indicator light continues flashing
· Open the water tap to fill the tank up to the level mark; filling must be higher than the minimum level
sensor but not exceed the maximum level marked on the tank
· For models with automatic control water filling starts. The desired level can be selected by pressing the
button with symbol
Note
If the water does not arrive to the level sensor, the level sensor control unit does not permit the
heating element to heat up
· Turn the control knob corresponding to the plate from position "0" to the heating level desired, between 1
and 3
· The white indicator light turns on as soon as the heating element is powered
4.3
Switching the appliance off
; high level for cooking pasta, low level for steaming
Translation of the original instructions
18
Advertisement
Table of Contents
