1-6. MECHA IF 3 Board Removal
1. Unscrew the screw (N).
2. Slide the MECHA IF 3 Board in the direction of the
arrow and remove it..
MECHA
IF 3
Board
MOTHER
Board
Slide the Board in this direction.
1-7. Power Supply Unit Removal
1.
Disconnect the 2 connectors (P1501 and P1001)
and unscrew the 2 screws (O).
(O)
3.
Unscrew the 2 screws (P) and lift up the Power
Supply Unit.
P1501
P1001
(P)
1-8. Power Supply Unit
Disassembly
1. Unscrew the 6 screws (Q) and then remove the side
cover.
(N)
2. Remove the Plastic Barrier and POWER 2 Board.
Plastic
Barrier
3. Unscrew the 4 screws (S) and (R), and then remove
the POWER 1 Board.
(R)
POWER 1
Board
DIS-3
(Q)
POWER 2 Board
(S)