Confirmation Of Tape Damage For Long Tape Playback - Panasonic AJ-SD93P/E Service Manual

3-28. Confirmation of Tape Damage
for Long Tape Playback
<Confirmation procedure>
Item Confirmation
mode
×0.5 speed
Tape
(step slow)
Damage !
<Tape>
Long time L
cassette: thin tape
(AJ-5P92LP :
recorded tape) Tape
beginning portion
Tape SHTL
Repeat
Damage "
FWD←→REV
mode
(maximum speed at
Pinch ON condition)
<Tape>
Long time L
cassette: thin tape
(AJ-5P92LP :
recorded tape) Tape
end portion
1. Place the unit into above "Confirmation mode".
2. Confirm that tape damage doesn't occur on tape
at lower limit of T3 and T4 post.
3. If it is out of SPEC., adjust T4 post and return to
item 3-20.
NOTE: Recording mode of the tape which is used
for this confirmation is DVCPRO50 mode.
Specification
Tape damage
should not occur
on tape at lower
limit of T3 and T4
post.
Tape damage
should not occur
on tape at lower
limit of T3 and T4
post.
MECH-20