Panasonic AJ-SD93P/E Service Manual page 64

H00: OTHER ADJUST
Item
SUPER
No. No.
DISP.
H01 STILL LIMIT
H02 LTC OUT SEL
H02: TC output in case of LTC OUT SEL = STOP setting
TC
INT/EXT
EJECT
STOP
STANDBY OFF
INT
JOG/VAR/SHTL STILL
Others
EJECT
STOP
STANDBY OFF
EXT
JOG/VAR/SHTL STILL
Others
Set value
SUPER
DISP.
0 2 min
Set the maximum value of the "SETUP-MENU 400 : STILL TIMER".
1 6 min
Decide whether the still timer should be reset when the
STANDBY-ON command is received during the STOP mode.
0:2 min/The still timer should not be reset
1:6 min/The still timer should be reset
0 N-STOP
Selection of TC output according to the mode or not
1 STOP
0: Output always, independent of the mode
1: ON/OFF switching of the TC output according to the VTR mode.
However, the TC output always is ON at the time of SETUP
MENU 317: AUD MEM MODE = AMU_X, AMU_VO.
Mode
(including BLACK, GLAY of EJECT)
Setting contents and
outline function explanation
VV / EE
—
—
V V
EE
—
INF-51
BACK
Remarks
-UP
Yes
Yes
TC output
OFF
ON
OFF
ON
ON