Lista Connection And Boot Up - Panasonic AJ-SD93P/E Service Manual

3-30. LISTA Connection and Boot Up

TEST
ATF ERROR
POINT
TRIGGER (H SW)
M. EQ.
PC (Personal Computer) (A/D board should be installed)
TAPE
NTSC : VFM3581KM or VFM3581KL (LISTA), VFM3000EDS (DV LISTA)
(PAL : VFM3681KM or VFM3681KL (LISTA), VFM3000EDS (DV LISTA))
TOOL
VFK1481K (LISTA Software), VFK1186 (LISTA Cable), VFK1300 (AD Converter board)
<Classified list for LISTA Connection>
1. Connect the LISTA cable to A/D Board in the PC.
2. Connect the clips of the LISTA cable to test point on the P.C.Board.
3. Boot up the LISTA software on DOS mode.
♦ How to install and boot Up ♦
Make a directory like C : Lista and Copy all files in the floppy disk (VFK1481K : LISTA Software) to it on PC.
Type "LISTA" and press ENTER key, then the LISTA software VFK1481K boot up.
4. After the LISTA software boot up, <<< FORMAT SELECT >>> display appears. Select the "DVCPRO 50" so
that the <<VTR SELECT>> Menu appears.
5. Select "AJ-D950" in <<VTR SELECT>> menu so that the <<Alignment Tape Select>> Menu appears.
R/P-L TP6701 RF/CUE
R/P-R TP6801 RF/CUE
PB-L TP6701 RF/CUE
R/P-L TP233 SERVO (F1)
R/P-R TP235 SERVO (F1)
PB-L TP232 SERVO (F1)
MECH-22