Flash Rom / Fpg Software Version Upgrade Procedure - Panasonic AJ-SD93P/E Service Manual

F4: AVIO Board (AJ-YA93G)
IC3400

12-2. Flash ROM / FPG Software Version Upgrade Procedure

Connect the VTR with personal computer by RS232C cable (Cross cable) and Flash Memory Version-up Tool
(VFK1304A) as shown below.
RS-232C CROSS CABLE
PC
12-2-1. Preparations for the Version Upgrade
1. Items required for flash memory writing
Version Upgrade Software .........................................................VFK1248N or higher
VFK1248N consist of 4 type of software as shown below.
Personal Computer : WINDOWS95/98
RS-232C Cable (D-sub 25pin-25 pin cross cable or D-sub 9 pin-25 pin cross cable)
Flash Memory Version Up Tool ..................................................VFK1304A
2. Switch setting of the flash memory version upgrade tool
Confirm that the switch settings for the "flash memory version up tool (VFK1304A)" are as shown below.
FLASH MEMORY VERSION
UP TOOL (VFM1304A)
· VSI2312N.exe
· f_servo.obf
· FW103u.exe
· Setting.ini
SW1-1: ON SW1-3: OFF
SW1-2: ON SW1-4: OFF
F5: SDI Board (AJ-YA94)
Figure 12-1A-3
Figure 12-2A-1
INF-21
IC255
TO THE CONNECTOR
ON TEH SERVO OR DPROC
BOARD IN THE VTR.