Panasonic AJ-SD93P/E Service Manual page 63

F00: VIDEO ADJUST
Item
SUPER
No. No.
DISP.
F03 VIDEO MUTE
F10 TELETEXT INI
F11 V SETUP
F15 22L BLANK
F17 GAP COUNT
F18 DIF PLL TEST
G00: AUDIO ADJUST
Item
SUPER
No. No.
DISP.
G01 REF_LEVEL1
G02 REF_LEVEL2
G03 REF LV INI
G05 AES PHS
CORR
G08 AUD PB MODE
Set value
SUPER
DISP.
0 NORMAL
This menu is only for Factory use.
1 MUTE
Select whether the VIDEO output is to be made gray or not
0:Normal output
1:Forced gray output
0 MOJI
Factory default setting of Menu
1 NABTS
No802 : TELETEXT INI is selected.
0:MOJI (Shipping for T)
1:NABTS (Shipping for P, E)
* Menu No802 is only valid for 525 mode.
0 OFF
Switching of effective/not effective for SETUP-MENU 622: SETUP
1 ON
25, 623:SETUP50
0:SETUP-MENU 622: SETUP 25, 623: SETUP50
is not displayed and THRU is sent forcibly to AV.
(Shipping setting for T)
1:SETUP-MENU 622: SETUP 25, 623: SETUP50
is displayed and the set value is sent to AV.
(Shipping setting for P, E)
Menu No 622, 623 is only valid for 525 mode.
0 OFF
Switching of effective/not effective for SETUP-MENU 805: 22 & 285
1 ON
BLANK
0:SETUP-MENU 805: 22 & 285 BLANK
is not displayed and OFF is sent forcibly to AV.
(Shipping setting for P, E)
1:SETUP-MENU 805: 22 & 285 BLANK
is displayed and the set value is sent to AV.
(Shipping setting for T)
Setting of the GAP COUNT for DVCPRO I/F
0 0
This menu is only for Factory use.
|
|
40 40
| |
64 64
Set it "ON" for PLL adjustment on the AVMON Board..
0 OFF
1 ON
Set value
SUPER
DISP.
0 FS-20
Selection of the audio I/O reference level
1 FS-18
0: Full scale -20 dB (Shipping setting for T,P)
2 FS-12
1: Full scale -18 dB (Shipping setting for E)
2: Full scale -12 dB
• Change of the set value is possible only when G02: REF_LEVEL2
= 0 dB has been set.
• The marker for REF LEVEL is not displayed on the Front Panel
when FS-12 is selected with FINE mode (front meter).
0 0dB
Selection of the SETUP-MENU set value for switching of the audio I/O
reference level.
1 -3dB
• Set value change is possible only when G01:REF LEVEL 1 = FS-18
has been set.
0 0dB Setting of the factory default value of the SETUP-MENU for audio I/O
reference level switching.
1 4dB
701:CH1 IN LV
702:CH2 IN LV
703:CH3 IN LV
704:CH4 IN LV
705:CUE IN LV
706:CH1 OUT LV
0: 0 dB (Shipping setting for P,E)
1: 4 dB (Shipping setting for T)
0
NORMAL Select whether AES/EBU output is synchronized with Video output or
not.
1 OFF
0: AES/EBU is synchronized with Video Output.
1: AES/EBU is not synchronized with Video Output.
Setting of audio playback mode
0 MODE1
0: NOMAL Mode
1 MODE2
1: Setting is carried out when directly editing the jointed tape on
which recording was performed with a camera recorder or
playing back the edited tape.
Setting contents and
outline function explanation
Setting contents and
outline function explanation
707:CH2 OUT LV
708:CH3 OUT LV
709:CH4 OUT LV
710:CUE OUT LV
711:MONIL OUT LV
712:MONIR OUT LV
INF-50
BACK
Remarks
-UP
No
Yes
Yes
Yes
Yes
Yes
BACK
Remarks
-UP
Yes
Yes
Yes
Yes
Yes