Panasonic AJ-SD93P/E Service Manual page 37

12-2-3. Microcomputer Flash ROM Version Upgrade Procedure (2)
<SERVO Microcomputers (SERVO Board)>
1. Turn on the VTR power.
2. Copy the program software for the SERVO and SYS_IF as shown in the table 12-1 into the personal
computer.
3. Execute the VSI2312N. exe so that the following screen appears.
4. Select the CPU (Microcomputer) sheet as shown in figure 9-1C-1.
Select CPU
5. Select the each item on the Setup Panel as shown in the table 9-1-10.
Board Name
(Slot No.)
SERVO Board (F1)
(5) Setting for PC
* The numbers (1) – (5) in the above tables show the number in figure 9-1B-1 (Setup Panel).
(1)
(2)
(3)
(4)
(5)
(3) Microcomputer
Select
MN10300 Series
Port
Stop Bits
Parity
Figure 12-2C-1
(4) Software (3)
Select
FILE
data
Do not set any one. MOT
COM1 Baud Rate
1Bit Byte size
Table 12-2C-2
INF-24
Writing data (4)
FILE
Extension
.mot or s off
115200
8Bits
Target
machine
ID check