Spectrum Controls SLC 500 User Manual page 40

5-2 Chapter 5: Maintaining your Module and Ensuring Safety
WARNING
Section 5.3
Getting Technical
Assistance
Section 5.4
Declaration of
Conformity
User's Manual Pub. 0300128-04 Rev. A
POSSIBLE EQUIPMENT OPERATION
Never reach into a machine to actuate a switch. Also, remove all electrical
power at the main power disconnect switches before checking electrical
connections or inputs/ outputs causing machine motion.
Failure to observe these precautions can cause personal injury or equipment
damage.
Safety Circuits – Circuits installed on machinery for safety reasons (like over-
travel limit switches, stop push-buttons, and interlocks) should always be hard-
wired to the master control relay. These circuits should also be wired in series so
that when any one circuit opens, the master control relay is de-energized, thereby
removing power. Never modify these circuits to defeat their function. Serious
injury or equipment damage may result.
Refer to your system's Installation & Operation Manual for more information
Note that your module contains electrostatic components that are susceptible to
damage from electrostatic discharge (ESD). An electrostatic charge can
accumulate on the surface of ordinary wrapping or cushioning material. In the
unlikely event that the module should need to be returned to Spectrum
Controls Inc., please ensure that the unit is enclosed in approved ESD
packaging (such as static-shielding/metallized bag or black conductive
container). Spectrum Controls, Inc. reserves the right to void the warranty on
any unit that is improperly packaged for shipment.
RMA (Return Merchandise Authorization) form required for all product returns.
For further information or assistance, please contact your local distributor, or call
the Spectrum Controls Technical Support at:
For Rockwell Automation Compatible I/O Products:
USA
•
United Kingdom
•
Australia
•
Mexico
•
Brazil
•
Europe
•
Available upon request
1-440-646-6900
01-908-635-230
1-800-809-929
001-888-365-8677
55-11-3618-8800
+49-211- 41553-630