The pi pe mus t be lai d in s uch a manner that any c ondensation w ater c annot fl ow back i nto the pum p. In the cas e of a rising pi pe, w e r ecomm end usi ng a c ondens ate tr ap (Woulff bottl e or w ash bottle).
Pos : 131 /010 Univ ers almodul e/
Seitenwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
Version 11/2018, Rev. 1.9 of 01/12/2021 • sb
Translation of the original operating manuel
Fig. 12: Indication of the maximum current for the vacuum pump (example)
The oil mist that escapes from the pump during operation must be retained
or discharged via an exhaust filter (oil mist separator).
•
We strongly recommend using an oil mist separator. The filter prevents
air pollution by the oil mist that is emitted more or less strongly by the
pump depending on the working pressure. The hose line must be laid in
such a manner that any condensation water cannot flow back into the
pump. In the case of a rising hose line, we recommend using a
Need help?
Do you have a question about the Alpha 3-4 LSCbasic and is the answer not in the manual?
Questions and answers