Freeze-dryer Alpha 3-4 LSCbasic
4 Storage and transport
→
Pos : 108 /200 Chris t/361 GT-BA Labor-Pil ot ( PROJ EKTE)/Alpha/Al pha 1- 4_2-4_3-4 Standard/Alpha 3-4 LSCbasic/040 Lager ung und Tr ansport/040- 0020 Transporthinw eis e Al pha 3- 4 @ 59\m od_1534401634856_68.docx @ 589618 @ 2 @ 1
4.3
Notes on transport
CAUTION
CAUTION
Pos : 109 /010 Univ ers almodul e/
Seitenwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
40 / 117
•
Use suitable packaging for the transport, and if at all possible, the
original packaging.
•
Install all transport safety devices (see chapter 4.5 - "Transport locking
devices").
•
Over short distances, the freeze-dryer can be transported by a suitable
number of persons who reach under it from the sides.
•
When lifting the freeze dryer, always reach under the freeze-dryer from
the side. Do not grab the unit at the plastic control panel (see figures
below).
correct
Fig. 9: Lifting the freeze-dryer
The freeze-dryer Alpha 3-4 LSCbasic weighs approx. 86 kg!
The centre of gravity of the freeze-dryer is off-centre!
•
When setting the unit down, ensure that the feet are upright (see figures
below).
correct
Fig. 10: Unit feet
incorrect
incorrect
Version 11/2018, Rev. 1.9 of 01/12/2021 • sb
Translation of the original operating manuel
Need help?
Do you have a question about the Alpha 3-4 LSCbasic and is the answer not in the manual?
Questions and answers