Advertisement
F3SG-RA
Sensor Mounting Brackets
Appearance
*1 Two brackets per set
[for F3SG-@RA@@@@-14]
- Protective height of 0160 to 1200: 2 sets, Protective height of 1280 to 2080: 3 sets
[for F3SG-@RA@@@@-30]
- Protective height of 0190 to 1230: 2 sets, Protective height of 1310 to 2270: 3 sets, Protective height of 2350 to 2510: 4 sets
*2 Top/Bottom Adjustable Bracket cannot be used with the Standard Fixed Bracket. Use with the Standard Adjustable Bracket.
(See *1 for the number of required brackets.)
Interface units and configuration tool SD Manager 2
Appearance
Lamp
Appearance
End Cap
Appearance
4
Specification
Bracket to mount the F3SG-R.
Standard Fixed
Side mounting and backside mounting possible.
Bracket
(Included in the F3SG-R product package. See *1 below
for the number of included brackets.)
Bracket to mount the F3SG-R.
Standard
Beam alignment after mounting
possible.The angle adjustment range is ±15°.
Adjustable
Bracket
Side mounting and backside mounting possible.
(Sold separately. See *1 below for the number of required brackets.)
Bracket to mount the F3SG-R. Use this bracket at the
top and bottom positions of the F3SG-R.
Top/Bottom
Beam alignment after mounting possible.
The angle adjustment range is ±22.5°.
Adjustable Bracket *2
Side mounting and backside mounting possible.
(Sold separately. 4 brackets per set.)
Top/Bottom
Top/Bottom Adjustable Bracket without a bracket to
Adjustable Bracket *2
mount to the wall. Use the user's own wall mounting part
(For user-made
to suit the machine.
mounting part)
(Sold separately. 4 brackets per set.)
Type
The Configuration Tool SD Manager 2 is available to
download from our website at
http://www.omron247.com/ safety_light_curtain/
SD Manager2
f3sg_ra/Software tools/SD Manager 2 Configurator.
To change the settings of the F3SG-RA using SD
Manager 2, it is necessary to set the receiver's two
DIP switches No. 8 to ON.
F39-GIF interface unit to connect the F3SG-RA
Interface Unit
receiver to a USB port of the PC
F39-BT bluetooth unit to enable bluetooth on the
Bluetooth unit
F3SG-RA
Type
Lamp unit
The lamp unit can be connected to a receiver and
turned ON based on the operation of F3SG-RA.
The lamp can indicate red, orange, and green colors,
to which three different states can be assigned.
Bluetooth + Lamp unit
Housing color: Black
For both emitter and receiver
(Attached to the F3SG-R. The End Cap can be purchased if lost.)
Application
Specifications
Specifications
Specifications
Model
F39-LGF
F39-LGA
F39-LGTB
F39-LGTB-1
Model
−
F39-GIF
F39-BT
Model
F39-LP
F39-BTLP
Model
F39-CNM
Advertisement
