Advertisement
F3SG-RA
Indicator
Emitter
Name of Indicator
Test
TEST
Operating range
LONG
Power
POWER
Lockout
LOCKOUT
Receiver
Name of Indicator
Top-beam-state
TOP
PNP/NPN mode
NPN
Response time
SLOW
Sequence error
SEQ
Blanking
BLANK
Configuration
CFG
Interlock
INT-LK
External device
EDM
monitoring
Internal error
INTERNAL
Lockout
LOCKOUT
Stable-state
STB
ON/OFF
ON/OFF
Communication
COM
Bottom-beam-state
BTM
Interface Unit
Main unit
Operating system (OS)
Communication port
Ambient temperature
Ambient humidity
Lamp
Item
Applicable Sensor
LED Light Color
Power Supply Voltage
Current Consumption
Ambient Temperature
Ambient Humidity
Vibration Resistance
Shock Resistance
Degree of Protection
Type of Connection
Material
Weight
10
Color
Green
Green
Long range mode is selected
Green
Power is ON.
Red
Color
Blue
The top beam is unblocked
Green
NPN mode is selected by DIP Switch
Green
Response Time Adjustment is enabled
Yellow
Blanking, Warning Zone or Reduced Resolution is
Green
enabled
Green
Yellow
Interlock state
Green
RESET input is in ON state
Red
Red
Green
Incident light level is 170% or higher of ON-threshold
Green
Safety output is in ON state
Safety output is in OFF state, or the sensor is in
Red
Setting state
Synchronization between emitter and receiver is
Green
maintained
Blue
The bottom beam is unblocked
PC/AT compatible machine (computer that runs Microsoft Windows)
Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
USB port ×1
Operating: -10 to 55°C, Storage: -30 to 70°C(non-icing and non-condensing)
Operating: 35% to 85%, Storage: 35% to 95%(non-condensing)
F3SG-@RA Series Safety Light Curtain (Receiver)
Red/Green/Orange
24 VDC±20%, ripple p-p 10% max.(shares sensor's power supply)
25 mA max. (shares sensor's power supply.)
Operating: -10 to 55°C, Storage: -25 to 70°C
Operating: 35% to 85%, Storage: 35% to 95%
10 to 55 Hz, Multiple amplitude of 0.7 mm,20 sweeps for all 3 axes
100 m/s
2
, 1000 shocks for all 3 axes
IP65 and IP67(When attached to F3SG)
Connectable to F3SG-RA's terminal connector
Lighting element: PC, Other body parts: PBT
45 g (when packaged)
Illuminated
−
External Test is being performed
Lockout state due to DIP Switch setting error
or Operating range selection setting error
Error due to noise
−
Lockout state due to error in emitter
Illuminated
Muting/Override state, or Lockout state due to Cap
error or Other sensor error
−
Sequence error in Muting or Pre-reset mode
Teach-in mode, or Blanking Monitoring error
Teach-in mode, zone measurement beng performed
−
by Dynamic Muting, or Lockout state due to
Parameter error or Cascading Configuration error
Pre-reset mode
Lockout state due to EDM error
Lockout state due to Internal error, or error due
−
to abnormal power supply or noise
−
Lockout state due to error in receiver
Safety output is instantaneously turned OFF due to
ambient light or vibration
Lockout state due to Safety Output error, or error due
to abnormal power supply or noise
Lockout state due to Communication error, or error
due to abnormal power supply or noise
Muting/Override state, or Lockout state due to DIP
Switch setting error
F39-LP
Blinking
Blinking
−
−
−
Advertisement
