Installation Sequence Siting The Vitocell; Fitting The Lower Thermal Insulation Mat; Levelling The Vitocell - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Siting the Vitocell
!
Please note
Exposure to frost can cause material damage.
Install the buffer cylinder in a room that is free
from the risk of frost and draughts. Otherwise
the buffer cylinder will have to be drained if there
is a risk of frost while it is not in use.
Provide adequate clearance from the wall to allow for
■
operation of the temperature controller (if installed).
■ Placing the heating water buffer cylinder on a plinth
will make the room easier to clean.
■ Use the adjustable feet to level the buffer cylinder.

Fitting the lower thermal insulation mat; levelling the Vitocell

1.
A
2.
B
Fig.1
Type plate
A
Bag with 3 adjustable feet
B
!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and soldering.
4.
3.
3x
Installation sequence
7