Installation Sequence Installation; Fitting The Lower Thermal Insulation Mat And Aligning The Cylinder - Viessmann Vitocell 100-E Installation And Service Instructions Manual
Hide thumbs
Also See for Vitocell 100-E:
Table of Contents
Advertisement
Installation sequence
Installation
!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and brazing.
Fitting the lower thermal insulation mat and aligning the cylinder
1.
A
2.
B
Fig.3
A
Type plate
3 adjustable feet
B
Insert the adjustable feet into the legs as far as they
will go, then adjust them to level the cylinder.
Note
Never extend the adjustable feet beyond a total length
of 30 mm.
6
4.
3.
3x
Note
Seal any connections that are not required with red
brass caps.
Advertisement
Table of Contents
