Installation Sequence - Viessmann Vitocell 140-E Installation And Service Instructions Manual

Cylinder without fitted Solar-Divicon
See page 17 for installation of the version with fitted
Solar-Divicon (accessories).
Siting and levelling
!
Please note
The thermal insulation must not come into con-
tact with naked flames.
Exercise caution when welding and brazing
1.
A
2.
B
Fig. 2
Bag with type plate
A
Bag of 3 adjustable feet
B
3. Insert the adjustable feet into the supports as far
as they will go, then adjust them to level the cylin-
der.
Note
Never extend the adjustable feet beyond a total
length of 35 mm.
4.
3.
3x
5. If no immersion heater is installed, seal in the front
female connection with plug R1

Installation sequence

supplied.
½
9