ElectrIQ eiQCHINTGY60 User Manual page 9

3. Mark the installation position of the door and the size of the fixed screws. If the upper
edge of the door is not as high as the upper edge of the cupboards, please adjust the
position accordingly. Mark the positions of the screws on the door, and make sure the
position is as accurate as possible.
4.
5. Fix the fan-shaped door frames on the door with screws. Make sure the frames are
symmetrical. Install the door into the cooker hood, the two sides of the door can be
pulled to the end and the door can be safely locked. If the door cannot be safely locked,
release the plastic handle.
10. The two screws on both sides of the
cooker hood can adjust the sliding of the
door, according to the weight of the door.
9