Ice Hopper Cleaning Entry Sub Cycle; Empty The Ice Hopper; Ice Hopper Cleaning Cycle - Cornelius IDC175-HD Operator's Manual

Table of Contents

1. Hopper Cleaning Entry Sub Cycle

Locate the keypad UI on the store side of the unit.

Flip the access door down to locate programming button (refer figure 8).

Press and hold the programming button then press and hold the pour/

cancel button. Keep pressing both for 5 seconds to start the cleaning

process.

All of the LED lights will light for 1 second. Then, the first light to the left

(L1) will flash.

NOTE:A 30 second timer will start. If no buttons are pressed, the

user interface will automatically cancel the cleaning process and it

will return to normal operation mode.

Ensure that the ice collection trays are under both of the ice dispense

chutes.

Press the pour/cancel button to start the ice dispense. L1 LED will become

illuminated (See Figure 11).

Press the pour/cancel button to pause or restart the ice dispensing as the

ice collection trays are filled.

Press the up arrow in the programming area when the hopper is empty.

3. Hopper Cleaning Cycle

L2 LED will start flashing, signaling that it is ready to proceed to the next

step.

Remove the collection trays.

Place the funnel under both of the ice dispense chutes.

HD Tower Dispenser Operator's Manual

- 9 -

Figure 8

Figure 9

Figure 10

Figure 11

Ice

Chute

Place

funnel

here

Figure 12

Publication Number: 621058513OPR

Table of Contents