Rinse Cycle - Cornelius IDC175-HD Operator's Manual

HD Tower Dispenser Operator's Manual
Locate the clean hose assembly, route through the door, connect, and
insert into Bucket # 1 (cleaning solution).
Press and hold pour/cancel button for 5 seconds to begin this step
(Cleaning solution will begin to flow through the ice chutes). L2 will
become illuminated (See Figure 16).
IMPORTANT: Before starting, make sure the hose is placed all the
way to the bottom of the bucket which contains cleaning solution.

4. Rinse Cycle

L3 LED will be flashing, signaling that it is ready to proceed to the next
step.
Change the hose to Bucket #2 with rinse water.
Press and hold the pour/cancel for 5 seconds to begin. L3 will be
illuminated (see Figure 19).
IMPORTANT: Before starting, make sure the hose is placed all the
way to the bottom of the bucket which contains cleaning solution
Publication Number: 621058513OPR
CIP door
- 10 -
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19
© 2014-2015, Cornelius Inc.