Data.out."/"Com. Sbi" Menu - VWR avantor Premium Balance Analytic PBA Operating Instructions Manual

Parameter Setting values
EXT.KEY PRINT
CAL.
CF
ENTER
ZERO
TARE
GLP END
NO*
ON/STDB.*
ON MODE
ON/OFF
AUTO ON
OFF
LIGHT
ON*
* Factory setting
7.3.6

"DATA.OUT."/"COM. SBI" Menu

Parameter Setting values
COM. OUTP. IND.NO*
IND.AFTR
AUTO.W/O
AUTO W/
STOP.AUT. OFF*
ON
AUTO.CYC. EACH.VAL*
AFTER 2
INTERV.
FORMAT 22CHARS*
16CHARS
EXTR.LIN.
AUTO.TAR. OFF*
ON
* Factory setting
Explanation
Assigns the print function to the external key.
Assigns the calibration and adjustment function selected under
[CAL./ADJ.] to the external key.
Assigns the [Back] function to the external key.
Assigns the [Confirm] function to the external key.
Assigns the [Zero] function to the external key.
Assigns the [Tare] function to the external key.
Assigns the [GLP] function to the external key.
No function is assigned to the external key.
The [On/Off] button switches between on/standby with time.
The [On/Off] button switches between on/standby without time..
Changes the function of the [On/Off] button: The device no longer switches off
or to standby mode, instead it starts a boot process.
Deactivates the lighting on the operating display.
Activates the lighting on the operating display.
Explanations
Activates the manual data output without stability.
Activates the manual data output after stability.
Activates the automatic data output without stability.
Activates the automatic data output after stability.
Deactivates the option to abort the automatic data output.
The automatic data output is aborted by pressing the [Print] button or
a software command.
Starts the automatic data output with a cycle after each value.
Starts the automatic data output with a cycle after every 2nd value.
The output rate can be set from 0 - 9999 seconds under "INPUT/INTERV.".
The data output provides 22 characters per line (16 characters for the measured
value and 6 characters for identifiers).
The data output provides 16 characters per line for the measured value.
The data output provides an additional line with the date, time,
and weight value.
Deactivates automatic taring after data output.
The device automatically tares after data output.
System Settings
Operating Instructions 23