Table of Contents
Advertisement
6
Getting Started
6.1
Installing the Power Supply Unit
6.1.1
Assembling the Power Supply Unit
Item number
Power supply unit with connection
on packaging
cable and country-specific power plug
adapters (packed in PE bag with
printed country identification, e.g. EU)
611-4917
USA and Japan (US+JP), Europe and
Russia (EU+RU), Great Britain (UK),
India (IN), South Africa (ZA), Australia (AU),
China (CN)
Procedure
Push the power plug adapter as far as you can until it
t
clicks into place.
Check whether the power plug adapter is securely
t
locked in place by pulling it gently.
If the power plug adapter does not move: It is locked
y
in place.
Select the country-specific
t
power plug adapter. The
power plug adapter must
be suitable for use with the
wall outlet at the installa-
tion site.
Insert the power plug
t
adapter into the power
supply unit. The grooved
button must be facing
upwards.
6.1.2
Dismantling the Power Plug Adapter
Procedure
6.2
Connecting the Power Supply
Procedure
WARNING Severe injuries caused by using
t
defective power supply cables! Check the power
supply cable for damage, e.g. cracks in the insulation.
If required: Contact VWR Service.
t
Check whether the country-specific power plug
t
matches the power connections at the installation site.
If required: Replace the country-specific power
t
plug adapter.
NOTICE Damage to the device due to excessive input
t
voltage! Check whether the voltage specifications on
the manufacturer's ID label match those of the power
supply at the installation site.
If the input voltage is too high: Do not connect the
t
device to the power supply.
Contact VWR Service.
t
Connect the right angle plug to the "Power Supply"
t
connection.
Connect the mains plug to the wall outlet (mains
t
voltage) at the installation site.
The [BOOTING] display appears in the operating
y
display.
The device performs a self-test.
y
Getting Started
Press the grooved button
t
from above and pull back
on the power plug adapter.
Push the power plug
t
adapter out of the power
supply unit and remove it.
Operating Instructions
17
Advertisement
Table of Contents
