Cleaning and Maintenance
9.3
Installing the Draft Shield
9.3.1
Installing the Analytical Draft Shield
Procedure
If this relates to a device with a shield disk: Install the
t
shield disk, the pan support, and the weighing pan.
If this relates to a device without a shield disk: Install
t
the pan support and the weighing pan.
Connect the device to the power supply (see Chapter
t
"6.2 Connecting the Power Supply", page 17).
9.3.2
Installing the Round Draft Shield
Procedure
Install the draft shield (see Chapter "9.3 Installing the
t
Draft Shield", page 32).
Connect the device to the power supply (see Chapter
t
"6.2 Connecting the Power Supply", page 17).
32
Operating Instructions
Slowly slide the side
t
panels and the upper
panel into the frame rails.
Hold the handles on the
t
side panels or the upper
panel from the outside
and fasten to the inner
side with the screws.
9.4
Maintenance Schedule
Interval
Component Action
Regularly; depending
Device
on the operating
conditions
9.5
Software Update
For a software update, contact VWR Service.
Contact VWR
Service.