Setting And Visualisation For The Set Point; Locking And Unlocking The Touch Screen - Hayward EnergyLine Pro Installation Instructions Manual

4. USER INTERFACE (continued)
4.5 Settings and visualisation from the set point (desired
water temperature)
In Mode "OFF" and Mode "ON"
Press the buttons
made with a precision of 0.5 °C.
It is recommended to never surpass 30°C to avoid alteration of the
liners.
Note: When onor off, it suffices to press the button
the set point.

4.6 Locking and unlocking the touch screen

Press the On/Off button
.
To unlock, press
or to define the desired set point. The settings are
5 seconds until it beeps and this symbol appears
5 seconds until it beeps and this symbol disappears
or to seeor modify
.
15