Lightspeed Access Link User Manual page 25

Media Connector: Output to Assistive Listening Device (ALD)
1. Turn the AUDIO OUT volume control on the Media Connector front panel all way
the down.
2. Determine the size and type of audio input jack on the device as many
manufacturers' products differ in connector size and shape. Most personal FM
transmitters require a 3.5mm to 3.5mm patch cable (part# MSC3535).
3. Connect a patch cable from the ALD's microphone jack or AUX input to the 3.5mm
audio jack labeled "AUDIO OUT" on the back of the Media Connector.
4. With Access Link and ALD turned on, speak into the Flexmike and slowly adjust the
AUDIO OUT volume control on the Media Connector until the appropriate audio
level is attained in the ALD's receiver headphones.
5. It may be necessary to adjust the volume on the Personal FM receiver to achieve
appropriate volume level.
25
Audio Inputs Audio Outputs
USB
V / . A
ALD TRANSMITTER