Lightspeed Access Link User Manual page 20

Sharemike: Initial Set-Up
1. Ensure the Access Link is on. The white power light will glow.
2. Turn on the Sharemike by pressing and holding the power button
until the LED lights.
3. Grip the barrel in the center section.
4. While speaking in a normal voice, increase the volume with the
Sharemike until your voice is barely audible.
Power
POWER LIGHT
PLEASE NOTE: This equipment is designed to supplement and distribute
the user's voice so they are able to speak in a conversational tone. Having
the volume set too high will result in feedback and listener fatigue.
20
Status
Push
Level
Audio Tone
Input
POWER BUTTON
VOLUME CONTROL