Wire And Signal Characteristics For The J1 Connector - L3 CP-2500 Installation Manual

A.2 WIRE AND SIGNAL CHARACTERISTICS FOR THE J1 CONNECTOR
PIN 1
Signal Name:
Signal Type:
Electrical Characteristics:
Connection:
Comments:
PIN 2
Signal Name:
Signal Type:
Electrical Characteristics:
Connection:
Comments:
PIN 3
Signal Name:
Signal Type:
Electrical Characteristics:
Connection:
Comments:
PIN 4
Signal Name:
Signal Type:
Electrical Characteristics:
Connection:
Comments:
PIN 5
Signal Name:
Signal Type:
Electrical Characteristics:
Connection:
Comments:
PIN 6
Signal Name:
Signal Type:
Electrical Characteristics:
Connection:
Comments:
Page A-2
March 15, 2018
CP-2500
Installation Manual
PWR_14_28VDC_IN
+ 14/28 VDC Power IN
+ 11.0 to 33.0 Volts DC,
4 Watts Max Startup. 2 Watts Nominal.
Aircraft BUS. 22 AWG wire
Power Ground
14/28 V Power Return
--------
Aircraft Return BUS. 22 AWG wire
RS232_TX
RS-232
Data bits 8, Parity none, Stop bit 1, Start bit 1, Data
format is ASCII, Flow control is none.
Baud Rate: 9600 bps.
22 AWG Wire twisted shielded pair wire
RS232_RX
RS-232
Data bits 8, Parity none, Stop bit 1, Start bit 1, Data
format is ASCII, Flow control is none.
Baud Rate: 9600 bps.
22 AWG Wire twisted shielded pair wire
14/28 VDC RTN Display Dim Bus
Ground
22 AWG Wire
14 VDC Dim Bus for Indicator
Power In
22 AWG Wire (Either pin 6 or 7 is connected not both)
Option. May be connected to a Day/Night Switch.
Appendix A 0040-17251-01
Revision D