Table of Contents
Advertisement
1.2.1 NGT-1000/-2000/-2500
1.
The CP-2500 provides the following control functionality.
•
Enter Mode A Squawk Code
•
Set Operation Mode with selections of On, Alt, or Sby
•
Set Alt Reporting On or Off
•
IDENT
•
VFR Code Select
•
Set Flight ID (optional - enabled during installation)
•
Activate Anonymous Mode (optional - enabled during installation)
•
Activation of Self-Test
2.
The CP-2500 receives and displays the following information.
•
Transponder Code Mismatch Message
•
Fault Indications
•
Fault Messages
•
Pressure Altitude
•
ADS-B Out of Coverage indication (NGT-2000/-2500 only)
1.2.2 NGT-9000R
1. The CP-2500 provides the following control functionality.
•
Enter Mode A Squawk Code
•
Set Operation Mode with selections of On, Alt, or Sby
•
IDENT
•
VFR Code select
•
Set Flight ID (optional - enabled during installation)
•
Activation of Self-Test
•
Set TAS/TCAS On Ground
•
Traffic Functions
•
TAWS Functions
3.
The CP-2500 receives the following information.
•
Fault Indications from the Lynx MSS
•
Fault Messages
•
Pressure Altitude
•
Traffic Settings and Alert Information
•
TAWS Settings and Alert Information
0040-17251-01
Revision D
CP-2500
Installation Manual
General Information
Page 1-3
March 15, 2018
Advertisement
Table of Contents
