Table of Contents
Advertisement
1.2 FUNCTIONAL DESCRIPTION
The CP-2500 is an ADS-B Control Panel that interfaces with the Lynx® MultiLink Surveillance System
via a standard RS-232 interface. All connections to the Control Panel are made through a single 15 pin
male connector. The panel features three buttons and a dual concentric knob that can be rotated and
pressed to activate functions. LED display and backlighting provides a sunlight readable display with
smooth dimming. Refer to Figure 1-1.
The following are models of the Lynx MultiLink Surveillance Systems that interface with the CP-2500:
•
NGT-1000, NGT-2000, & NGT-2500 (also referred to as NGT-1000/-2000/-2500)
•
NGT-9000R, NGT-9000R+, NGT-9000RD, & NGT-9000RD+ (also referred to as NGT-9000R)
1. When the term Lynx MSS is used in this manual, it refers to all models
of the Lynx ® MultiLink Surveillance System.
2. Operational instructions are provided in the installation checkout section.
Page 1-2
March 15, 2018
CP-2500
Installation Manual
NOTES
Figure 1-1: CP-2500
General Information
0040-17251-01
Revision D
Advertisement
Table of Contents
