Assumptions; Static Handling Requirements; Minimum System Requirements; Getting To Know The Hardware - NXP Semiconductors UM11712 User Manual

NXP Semiconductors

3.2 Assumptions

3.3 Static handling requirements

3.4 Minimum system requirements

4

Getting to know the hardware

4.1 PCAL6534EV-ARD features

4.2 Kit featured components

UM11712
User manual
• Quick Start Guide
2
Familiarity with the I C-bus is helpful but not required.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care
should be taken during transport and handling. You must use a ground strap
or touch the PC case or other grounded source before unpacking or handling
the hardware.
This evaluation board requires a Windows PC workstation. Meeting these minimum
specifications should produce great results when working with this evaluation board.
• Computer with Windows 10
• One USB port (either 3.0 or 2.0 or 1.1 compatible)
• One of three EVK boards (MIMXRT1050-EVK, LPC55S69-EVK, 8MMINILPD4-EVK)
along with the associated firmware / GUI software
• USB cable for power and data connection between PC and EVK board (if not included
in the EVK package)
• I/O connectors for external access to IC input-output pins
• 5 user switches connected to I/O pins of the IC
• 8 user LEDs connected to I/O pins of the IC
• On-board LED display controlled from the I/O pins of the IC
• Equipped with Arduino Uno R3 port for direct connection with Arduino devices
• Fully compliant with IMXRT1050 EVK board, including GUI (Windows 10)
• Fully compliant with LPCXpresso55S69 dev. board, including GUI (Windows 10)
• Compliant with i.MX Mini LPDDR4 EVK board, including GUI (Windows 10)
Note: For i.MX Mini LPDDR4 EVK Board is necessary to use IMX8MMINI-IARD
interposer board between the EVK and PCAL6534EV-ARD daughterboard (see
IMX8MMINI-IARD User Manual).
Figure 1 identifies the main components on the board. The main elements are called out
in the picture. The Arduino port connectors (J1, J2, J3, J4) are located on the bottom side
of the board.
All information provided in this document is subject to legal disclaimers.
Rev. 1.0 — 31 January 2022
UM11712
PCAL6534EV-ARD evaluation board
© NXP B.V. 2022. All rights reserved.
5 / 31