Insportline Ocean User Manual page 7

STEP 3
Remove 1x 1/2 * 100 bolt (42), 2x OD22 * ID13 * 2.0T flat washers (43), 1x 1/2 self-locking nut (44)
and 1x 1/2 nut cap (52) from the main frame. Connect cables (58) and (59).
Insert the rail (1) into the main frame (2), insert the locking pin (55) and secure the rail in the frame
with 1x screw 1/2 * 100 (42), 2x flat washers OD22 * ID13 * 2.0T (43), 1x self-locking nut 1/2 (44) and
cover the nut with the cap (52).
Finally, fasten the rail in the frame with the hand knob (21), nut M12 * 1.75 (51) and flat washers OD32
* ID13.5 * 2.0T (63).
STEP 4
Insert the pedal shaft (20) through the hole in the main frame. On both sides, slide the spacer roller
(9), the flat washer OD22 * ID13 * 2.0T (43), the corresponding pedal (10L - right / 10R - left), the flat
washer OD22 * ID8.5 * 2.0T (45) onto the pedal axis.), M8 spring washer (46) and M8 nut (47).
Tighten the nuts properly.
7