Table of Contents
Advertisement
Step 2:
Assembly of the Top Frame
1.
Insert the guide rod mount (129) onto the guide rods (5).
2.
Assemble the guide rod mount (129) to the top frame (2) by using two bolts (108).
3.
Screw two set screws (112) into the guide rods (5).
4.
Place the top frame (2) on top, making sure to
insert the guide rods (5) and rear upright (4).
5.
Assemble the top frame (2) to the rear upright (4),
by using three screws (109) and three washers
(116).
6.
Assemble the top frame (2) to the front upright
(3) by using two bolts (98), four washers (116)
and two nylon nuts (124).
7.
Assemble the lat bar holder (22) to the top frame
(2) by using two bolts (104) and two washers
(117).
8.
Insert three end caps (67) to each end of the top
frame (2).
16
GX
Advertisement
Table of Contents
