Table of Contents
Advertisement
Industrial Electronic Devices
FUNCTION MODES:
The device has got two function modes depending on the position of the 'Dip1 of Dip-Switch A':
The first, with 'Dip1 of Dip-Switch A' at "OFF" position, is used for the normal working of the device.
The second, with 'Dip1 of Dip-Switch A' at "ON" position, is used for uploading the Project and/or Firmware.
For the operations to follow for the updating, see 'UPDATE DEVICE' section.
According to the functioning mode, the LEDs will have specific functions, see 'LEDS' section.
ADFweb.com S.r.l.
User Manual BACnet Master / CANopen
Document code: MN67718_ENG
Revision 1.000
Page 10 of 38
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67718-IP-A1 and is the answer not in the manual?
Questions and answers