Table of Contents
Advertisement
Industrial Electronic Devices
A
(B
):
LL DEVICES
ROADCAST
The means of the fields for the "CONTROL COMMANDS"
section are:
In the
"POWER
CONTROL" bar it is possible to change
the actual ADV of the entire DALI network;
In the field "COMMAND" it is possible to select a DALI
command to send to the entire DALI network. For set
commands, it is possible to insert the value to set in
the field "xx". As soon as the command to send is
selected, the command is sent: in order to send the
same command more times, it is possible to press the
"SEND
COMMAND" button;
In the field
"COMMAND
from the DALI network is printed.
Note:
This section is used to test the functioning of the DALI
network.
In the "SET SCENES" section it is possible to activate the
programmed scenes into all the DALI devices that have them:
By pressing the buttons
possible to activate the correspondent scene in the
DALI network. Only the devices that have it will accept
the command.
ADFweb.com Srl – IT31010 – Mareno – Treviso
FEEDBACK" the response
"GO TO: SCENE
X" it is
User Manual DALI / BACnet Master - Converter
Document code: MN67832_ENG
Figure 15: "Broadcast settings" window
INFO:
www.adfweb.com
Revision 1.000
Pagina 38 di 42
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67832-IP-B2 and is the answer not in the manual?
Questions and answers