Type 'Dpscfg' For Password Prompt.; Alternate Procedure; Activate The Configuration Menu. - DPS Telecom NetGuardian 832A Quick Start Manual

Connecting to Craft port
Type "DPSCFG" for password prompt.
o Type "dpscfg" and press <enter>. You will not see these letters appear as you
type, but you should see a password prompt, like the one below:

Alternate Procedure

o If the above step does not give you a password prompt, you may not be typing
fast enough, and can follow the option outlined below.
o Press the 'Menu' button on the front panel of the NetGuardian. Scroll down to
"Run Config." and press 'Select'.
o You should now see the password prompt.
o The default password for the NetGuardian is "dpstelecom"- all one word, not case
sensitive.
Activate the Configuration menu
o Press <ENTER> to activate the configuration menu.
Connecting to Craft port
.
12/04/2007