Table of Contents
Advertisement
Industrial Electronic Devices
NEW CONFIGURATION / OPEN CONFIGURATION:
The
"New
Configuration" button creates the folder which contains the entire device's configuration.
A device's configuration can also be imported or exported:
To clone the configurations of a Programmable "M-Bus / BACnet/IP - Converter" in
order to configure another device in the same manner, it is necessary to maintain the
folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button
"Open
Configuration".
ADFweb.com S.r.l.
User Manual M-Bus / BACnet/IP
Document code: MN67694_ENG
Revision 1.000
Page 13 of 25
Advertisement
Table of Contents
