Table of Contents
Advertisement
User Manual NMEA 2000 / EtherNet/IP - Converter
Document code: MN67458_ENG
Revision 1.000
Page 21 of 31
Industrial Electronic Devices
PLC CONFIGURATION:
The configuration and commissioning of the EtherNet/IP Converter as described on the following pages was accomplished with the help of the
"RSLogix 5000" software of Rockwell Automation. In case of using a control system from another supplier please attend to the associated
documentation.
These are the steps to follow:
1) Create a "Generic Ethernet Module" under the Ethernet section in the I/O Configuration tree.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67458 and is the answer not in the manual?
Questions and answers