Advertisement
GreyT Telescope - User Guide
(Rev 1)
Telescope - Step 7 (Flipped)
The string will be attached to the drum using the #10-32 x 3/8"L Bolt installed in Gearbox
- Step 1. The other end of the string will attach to a custom plate or shaft created by the
user.
Note: The string does not have to be run exactly as shown in the images down below�
However, the string must be run in a way to ensure that it does not collide with the CF
Springs in any of the installed Top Blocks�
Table of Contents
Page 41
wcproducts.com
Advertisement
