Advertisement
GreyT Telescope - User Guide
(Rev 1)
Gearbox - Step 6
Slide on all components in the order shown in the image below. If you plan on using a
CTRE Mag Encoder on the Output Shaft, you must drill out the shaft and press in the
1/4" OD x 1/2" L Magnet.
Note: If you do not plan on assembling the Gearbox with either the optional Friction
Brake or Ratchet & Pawl, you may omit the parts boxed in blue in the image down
below�
Table of Contents
Page 21
wcproducts.com
Advertisement
