GreyT Telescope - User Guide
(Rev 1)
Telescope - Step 6 (Continued)
If you are assembling the 1 to 1-1/2" Stage without the GreyT Telescope Hardstop, make
sure to only thread in the left hardstop bolt in the top block. If both bolts (or just the
right bolt) are used, the hardstop bolt may dent the slot for the Bearing Stack-Up in the
1" Tube Bottom Block. This could cause the 1" Bottom Block to rub against the 1/4" ID
Bearing, creating unnecessary friction in the assembly.
Table of Contents
Page 39
wcproducts.com