Advertisement
GreyT Telescope - User Guide
(Rev 1)
Telescope - Step 4
Pull the Top Block down the tube. Bolt the correct GreyT Telescope Hardstops to the
tube using Ultra Low Profile #10-32 x 3/8"L Bolts. These bolts should thread through the
Hardstop and into the Bottom Block. The hardstop used must be cut to the same width
as the tube it is being bolted to.
Note: It is recommended to have another person or a QuickGrip hold the Top Block in
place while installing the Hardstops�
Note: The GreyT Telescope Hardstop (WCP-0502) is not included or required� However,
it is recommended to purchase as it will help with the stabliity of the telescope when
fully extended�
Table of Contents
Page 36
wcproducts.com
Advertisement
