WCP GreyT User Manual page 37

GreyT Telescope - User Guide
(Rev 1)
Telescope - Step 5
Slide the assembly from Step 4 into the correct tube. For example, the image below
shows the 1-1/2" Tube being slid into the 2" Base Tube. Loosen the 4 bolts on the Top
Block and slide the Top Block over the end of the larger tube. The 4 unused tapped holes
in the Top Block will align with the 4 holes in the larger tube. Once the Top Block is in
place, tighten the 4 bolts on the Top Block.
Table of Contents Page 37
wcproducts.com