WCP GreyT User Manual page 10

GreyT Telescope - User Guide
(Rev 1)
GreyT Bottom Block - Step 1
The size of the 1/4" ID bearings used in this step are determined by the wall thickness of
tube you are using. For 1/8" wall tube these bearings will be 1/4" ID x 1/2" OD bearings,
and for 1/16" wall tube these bearings will be 1/4" ID x 5/8" OD bearings.
There should be one Bearing Stack-Up for each slot in the GreyT Bottom Block you are
assembling; 4 for the 1" Tube Bottom Block, and 8 for the 1-1/2" to 2-1/2" Tube Bottom
Blocks.
1" Tube Bottom Block 1-1/2" to 2-1/2" Tube Bottom Block
Table of Contents Page 10
wcproducts.com