3.1.3
SDD Installation
ITA-3650G reserves space for installing a 2.5" SDD module.
1.
Insert an SDD into the 2.5" SDD holder and secure in place using four screws.
2.
On both sides of the SDD holder are seven semicircle cutouts for rubber cush-
ions.
3.
Place the SDD holder onto the SDD bracket and secure in place using seven
screws.
4.
Install the complete SDD module in the chassis and affix in place using six
screws.
5.
Place a cooling pad onto the PCB panel of the SDD. Align the cooling pad with
the magnetic head to avoid covering the head.
ITA-3650G_Series User Manual
Figure 3.3 Installing an SDD Module
20