Installing The P Ower + Sa For 2-Phase Usage........................................84; Figure 20-3: Ups Rear Panel With Protective Cover - Gamatronic POWER+ SA User Manual

Gamatronic Electronic Industries Ltd.
20.1.1 Installing the P
Follow the following steps to Install the UPS and prepare it for initial
start-up:
To install the UPS and prepare it for initial start-up:
1. Verify that the external circuit breakers in the mains electrical cabinet for UPS
input, UPS output, and bypass are OFF. No voltage should be present in the
cables.
2. Verify that the battery cabinet circuit breaker is OFF.
3. Remove the protective cover from the UPS rear panel.
4. Connect the UPS wiring according to the labeling on the unit, shown in Figure
20-4 on page 85.

Figure 20-3: UPS rear panel with protective cover

84
+ SA for 2-phase usage
OWER
POWER + SA User Guide (UL), Release 1.8