Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Sandstrom S1DAB11E Instruction Manual

FM Operation

Switching from DAB to FM Mode

To switch the unit from DAB to FM mode, press the DAB/FM button once. The display will
show FM and the frequency.

Auto Scan

To search for an FM station, press and hold the
to start the auto scan. The display will show "Searching
... " . Once a station has been found, the scanning will stop
automatically.

Manual Scan

To search for FM stations manually. Press the
frequency is reached.

Audio Mode

Press the SELECT button to toggle between the Stereo or Mono selection.
The unit will automatically switch between stereo and mono mode,
but you can override this and switch this function manually. This is
helpful when receiving poor signal reception.

Storing Stations

You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the
station that you would like to save, press and hold
the PRESET button. The "Empty preset #" will show
on the display and the preset number will flash.
2. Press the buttons to select your desired preset
station number and then press the SELECT button
to confirm.
3. The station will be stored and the screen will then
show "Preset # Saved".
buttons
buttons repeatedly until your desired
GB
19