Recalling a Stored Station
1.
Once you have saved a station, you can recall a
preset menu by pressing the MEMORY button
on the unit or the remote control. "Recall from
Preset" menu will show on the display.
2.
Turn the SCROLL dial on the unit or press the
buttons on the remote control to select a preset
station you wish to listen to.
Press the SELECT button on the unit or the remote
3.
control to confirm.
4.
"P#" will show on the display to indicate the
station is preset (P1-P10).
GB
FM Operation
Press the MODE button on the unit or the remote control repeatedly to select FM mode.
Auto Scan
To search for an FM station, press and hold the
control, or press the SELECT button on the unit or the remote control to start the auto scan.
Once a station has been found, the scanning will stop automatically.
Manual Tune
To tune FM frequency manually, turn the SCROLL dial on the unit or press the
on the remote control until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by turning the SCROLL dial
on the unit or pressing the
adjust the frequency by 0.05MHz. If reception is still poor adjust the position of the aerial
or try moving the radio to another location.
Scan Setting
Press the MENU button on the unit or the remote control to access the main menu.
1.
Turn the SCROLL dial on the unit or press the
2.
select Scan setting, and then press the SELECT button on the unit or the remote
control.
Turn the SCROLL dial on the unit or press the
3.
select YES to receive a strong signal only.
4.
Press the SELECT button on the unit or the remote control to confirm.
24
buttons on the remote control repeatedly. Each press will
Recall from Preset
1.
BBC Radio 1
2.
[Not set]
3.
[Not set]
4.
BBC Radio 2
5.
[Not set]
buttons on the unit or the remote
buttons on the remote control to
buttons on the remote control to
buttons