Secondary Services; Manual Tuning; Storing Stations; Recalling A Stored Station - Sandstrom S1DAB11E Instruction Manual

Secondary Services

You may see a ">" symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press the SELECT button when the "<" appears in
the display before the station name. When the secondary service ends, the unit will
automatically switch back to the primary station.

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press the MENU button and then press the SELECT
button to select Manual tune, the display will now
show Manual tune.
2. Press the buttons to cycle through the DAB
channels, which are numbered from 5A to 13F.
3. After your desired channel number is selected, press
the SELECT button to enter the current multiplex,
the top line will now display the first station in the
multiplex.
buttons and then the SELECT button
4. Press the
button to select a station that you would like to
listen to.

Storing Stations

You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save.
Press and hold the PRESET button. The "Empty preset #" will show on the display and
the preset number will flash.
2. Press the buttons to select your desired preset station number and then press the
SELECT button to confirm.
3. The station will be stored and the screen will then show "Preset # Saved".

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by
pressing the PRESET button.
2. Press the buttons to select your desired preset station number.
3. Press the SELECT button to confirm the selection.
If you choose a preset that hasn't been allocated a station, the "Empty preset #" will
4.
be displayed.
GB
17