Sleep Function (Ac Operation Only); System Reset - Sandstrom S1DAB11E Instruction Manual

Sleep Function (AC Operation Only)

This function allows you to program the unit to switch off by itself after a set period of time.
1. To activate the sleep function, press the SLEEP button repeatedly until the "Sleep
Timer" shows on the display. The time will change in the below sequence on every
press:
2. When your desired sleep time appears in the display, release the button and the sleep
function will be activated in two seconds. "S" will be displayed.
3. When the sleep time counts to zero, the unit will go off. To put the sleep function off
while the sleep timer is still counting down, press the SLEEP button once, "Sleep Off"
will be displayed.
Press the INFO button repeatedly to display the sleep timer status.
4.
The sleep function can be activated only in AC power operation.

System Reset

There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
Press and hold the MENU button until the "Press SELECT to confirm reset" shows on
1.
the display.
2. Press the SELECT button to start the system reset, "Restarting..." will show on the
display. After the reset is complete, the unit will go to standby mode.
Press the STANDBY/ON button again to turn the unit on, the unit will then start
3.
scanning for DAB channels immediately.
After the system reset, all the tuned stations, DAB & FM preset stations and
alarm settings will be erased.
GB
15