Fm Operation; Auto Scan; Manual Tune; Scan Setting - Sandstrom S3DABBI11E Instruction Manual

FM Operation

Press the MODE button on the unit or the remote control repeatedly to
select FM mode.

Auto Scan

To search for an FM station, press and hold the
unit or the remote control, or press the SELECT button on the unit
or the remote control to start the auto scan. Once a station has been
found, the scanning will stop automatically.

Manual Tune

GB
To tune FM frequency manually, turn the SCROLL control on the unit
or press the
frequency is reached.
With FM radio it may be necessary to fine tune each station by turning
the SCROLL control on the unit or pressing the
control repeatedly. Each press will adjust the frequency by 0.05MHz. If
reception is still poor adjust the position of the aerial or try moving the
radio to another location.

Scan Setting

Press the MENU button on the unit or the remote control to
1.
access the main menu.
Turn the SCROLL control on the unit or press the
2.
the remote control to select Scan setting, and then press the
SELECT button on the unit or the remote control.
Turn the SCROLL control on the unit or press the
3.
the remote control to select YES to receive a strong signal only.
Press the SELECT button on the unit or the remote control to
4.
confirm.

Audio Setting

Press the MENU button on the unit or the remote control to
1.
access the main menu.
30
buttons on the remote control until your desired
buttons on the
buttons on the remote
buttons on
buttons on